Menu
Call (272) 291-2023
Chimney Parts

Chase Cover Replacement Tamaqua, PA

The chase cover on a Tamaqua home with a factory-built fireplace can be swapped for one that sheds water with a sloped top, drip edge and sealed collar around the flue. One call to (272) 291-2023 reaches a nearby sweep who handles chase covers.

If your chimney is covered in siding instead of brick, it is probably a chase built around a metal flue. The top of the chase is sealed with a metal chase cover that has an opening for the flue pipe. Everything inside the chase depends on that cover staying watertight.

Builder grade chase covers are usually galvanized steel cut flat across the top. Flat covers hold standing water, and galvanized steel rusts once the coating wears, which leaves brown streaks down the siding and eventually holes in the pan. Rust running down the chase is usually the first clue.

Water that gets past the cover can do real damage inside the chase. It can rot the wood framing and sheathing, soak insulation, rust the metal fireplace and flue pipe and leave stains on ceilings or walls near the fireplace. Catching a bad cover early keeps the repair simple.

If the problem goes deeper than it first looked, a Tamaqua chimney sweep may also recommend chimney cap installation or chimney leak repair.

Looking for Tamaqua chase cover replacement? Call (272) 291-2023 to talk to a local chimney sweep.

Call now
The process

How chase cover replacement works

Replacing a chase cover is mostly about getting the fit right.

  1. Inspect the chase

    The condition of the cover, collar and chase top is checked. Damage below the cover may need repair before the new cover goes on.

  2. Take measurements

    Exact measurements are taken so the new cover fits snugly. A good fit matters more than anything else.

  3. Take off the old top

    The old chase top is removed, along with any rusted fasteners. This is the best time to look for rot.

  4. Set the cover

    A sloped stainless or copper cover is fitted and fastened through the side skirt. Fasteners are placed so they do not create new leaks.

  5. Reinstall the cap

    A sealed storm collar and cap close up the opening at the flue. The sweep makes sure water has nowhere to get in.

What is included

Chase cover options

Copper chase covers

Copper is a long lasting option that pairs well with copper flashing.

Sloped tops

A sloped or cross broken top keeps water from pooling so rust has less chance to start.

Skirt hems

A hemmed drip edge on the skirt kicks water away from the siding instead of soaking into it.

Stainless steel chase covers

A stainless cover holds up to weather for many years without needing paint.

Chimney caps

A new storm collar and cap finish the top for a complete watertight top.

Related service

Chimney Chase Repair Tamaqua, PA

A failed chase cover can lead to damage inside the chase, from the framing to the fireplace. The work may include new framing, new sheathing, siding repairs and drying or replacing insulation. The framed chase also needs proper flashing where it meets the roof.

When you call (272) 291-2023 from Tamaqua, mention where you have seen water or rust, since it helps locate the leak. Bigger framing repairs may involve a carpenter, while the cover and cap are handled by the sweep. Fixing the cover without fixing rot underneath only delays the problem.

Local help

Chase Cover Replacement Near Me

Chase covers in Tamaqua face every kind of weather the year brings, from summer storms to winter snow. Homes in Tamaqua and nearby towns such as Coaldale, Lansford, Summit Hill and Nesquehoning often have chase covers that were installed when the house was built and never replaced, which is why a chase cover is worth checking when the chimney is swept.

Need chase cover replacement around Tamaqua? Call (272) 291-2023 for a Tamaqua chimney sweep who serves the towns around it too.

What the local climate does to a chimney

Winters here are long and cold, and the heating season usually runs from October well into April. Masonry takes the worst of it from the freeze and thaw cycle: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Tamaqua, PA schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why act early

Safer fires

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Sweeps who know Tamaqua

Chimney sweeps in Tamaqua know the chimneys and fireplaces common in local homes.

Clear next steps

Ask your questions before you agree to anything.

Chase Cover Replacement questions

Why are there rust streaks on my chimney siding?
Rust usually comes from a galvanized cover that has started to break down. Flat tops that hold water rust faster. Those streaks are a sign the cover needs replacing.
Should I patch or replace my chase cover?
Small holes can sometimes be patched, but patches on a rusting galvanized cover rarely last. A new stainless or copper cover with a slope usually solves the problem for good. The framing beneath should be checked while the cover is off.
What does a chase cover do?
A chase cover is the metal top on a framed chimney chase, the boxed enclosure around a factory-built chimney pipe. Without it, water would run straight into the chase. A cap sits on top of the flue pipe that comes through the cover.
Why is there water in my prefab fireplace?
A failed chase cover is one of the most common causes of water in a factory-built fireplace. Over time, it can rust the metal firebox and flue and damage panels. A new cover and collar are often the fix.
How long will a new chase cover hold up?
A well made stainless or copper cover often outlasts the galvanized original by many years. Good design keeps water off the cover and the siding. A yearly look at the chase top is a good habit.

More questions? Call (272) 291-2023

Related services

  • Chimney Cap Installation

    Installing chimney caps with mesh sides sized to the flue tile or the whole crown.

    Learn more
  • Chimney Leak Repair

    Stopping chimney leaks at the source, whether the drip shows up in the attic, the ceiling or the firebox.

    Learn more
  • Chimney Waterproofing

    Waterproofing masonry chimneys with vapor-permeable repellents, not paint, applied after repairs so the brick sheds water but can still dry out.

    Learn more
  • Chimney Repair

    Repairs for the masonry, crown, flashing and flue of a damaged chimney, before small damage turns into a rebuild.

    Learn more

Looking for something else?

See all chimney services

Need chase cover replacement in Tamaqua, PA?

Call (272) 291-2023 for a local chimney sweep in Tamaqua and nearby towns.

(272) 291-2023

Free to call. No forms to fill out.

Call (272) 291-2023